Cleaning Protocols Every Reputable Tanning Salon Should Follow Post-Use

You clean every tanning bed after each client, using a hospital-grade disinfectant like Uva San with 0.025% Alkyl Dimethyl Ethylbenzyl Ammonium Chloride, letting it dwell 3–5 minutes on acrylic and metal surfaces. You wipe down all high-touch areas-shields, handrails, headrests-with color-coded cloths, pre-clean visible residue, and replace towels, eye protection, and booth disposables every time. You follow a 50+ item checklist, sign off daily, and make cleanliness visible so clients know the salon meets Fraser Health Authority standards. There’s more where that came from.

We are supported by our audience. When you purchase through links on our site, we may earn an affiliate commission, at no extra cost for you. Learn more. Last update on 20th June 2026 / Images from Amazon Product Advertising API.

Notable Insights

• Clean all high-touch surfaces, including acrylic shields and handrails, after every client using a hospital-grade disinfectant.
• Apply disinfectant like Uva San with a 3–5 minute air-dwell time on acrylic and metal to effectively kill germs.
• Pre-clean visibly soiled areas with a stronger solution before disinfecting to ensure thorough sanitation.
• Replace all disposables-towels, eye protection, slippers, face shields-after each client to prevent contamination.
• Use color-coded cloths and fresh cleaning tools daily, following a detailed checklist compliant with health authority standards.

Clean Tanning Beds After Every Single Use

You should always clean tanning beds after every single use-no exceptions. Every time a client steps out, your tanning beds must be cleaned thoroughly to prevent germ buildup and guarantee hygiene. High-touch areas like acrylic shields, handrails, and surfaces with visible stains need special attention before disinfecting. Use a pre-cleaning step for any residue, then apply disinfectant, letting it sit for several minutes-rushed wipe-downs won’t cut it. Products like Uva San Disinfectant, with 0.025% Alkyl Dimethyl Ethylbenzyl Ammonium Chloride and 0.025% Benzalkonium Chloride, require full contact time for maximum effectiveness. Lay-down beds and stand-up booths are both cleaned thoroughly, with plexiglass surfaces left moist for several seconds before wiping. Stand-up booths are physically reset between guests, eliminating reuse without sanitation. Proper cleaning isn’t optional-it’s essential for skin safety, equipment longevity, and client trust in your salon’s standards.

Apply Hospital-Grade Disinfectant the Right Way

A clean tanning bed starts with the right disinfectant applied the right way. You should use a hospital-grade solution like Uva San Disinfectant, which contains 0.025% Alkyl Dimethyl Ethylbenzyl Ammonium Chloride and 0.025% Benzalkonium Chloride. Always prepare a fresh batch daily, never diluting beyond what the label says, so you maintain germicidal power. If the tanning bed has visible grime, pre-clean with a stronger solution first-this guarantees proper contact. Then, apply disinfectant evenly to acrylic surfaces, keeping them wet for several seconds. Use color-coded cloths: one for tanning bed plexiglass, another for floors, to avoid cross-contamination. Let it air-dwell for 3–5 minutes on metal and acrylic parts to kill 95% of germs. Doing this correctly helps you maintain a hygienic environment and keeps your clients safe and confident in your service.

Wipe Down Every Surface the Client Touches

Though it might seem minor, skipping the wipe-down after each client can compromise the entire sanitation process, so don’t cut corners-every surface a client touches, from acrylic shields to control panels, must be thoroughly cleaned with a hospital-grade disinfectant like Uva San. You need to guarantee all high-touch areas-handrails, headrests, control panels-are wiped down thoroughly after each use. Uva San, containing 0.025% Alkyl Dimethyl Ethylbenzyl Ammonium Chloride and 0.025% Benzalkonium Chloride, stays on surfaces for several seconds to kill germs effectively. Use sanitizing wipes or sprays on pre-cleaned areas to reduce 95% of bacterial growth without leaving slippery residue. Assign color-coded cloths-like one for acrylic, another for metal-to keep things clean and hygienic and prevent cross-contamination. At places like Zoom Tan, every stand-up booth is fully wiped down between guests, so no touched surface goes unsanitized. Stay consistent and your salon stays clean and hygienic.

Replace Disposables to Prevent Contamination

After every surface is wiped down with a hospital-grade disinfectant, the next step in maintaining a germ-free tanning environment is replacing all disposable items without exception. You must swap out towels with fresh, single-use ones for every client-reusable versions can still harbor bacteria post-wash. Ditch foamy head pillows; their porous material traps moisture, encouraging mold and bacterial growth. Instead, use disposable or washable neck covers. Always provide new Winks brand eye protection or equivalent, since shared goggles risk spreading viruses through skin contact. Toss used gloves, wipes, and cleaning applicators immediately after each session to prevent cross-contamination. In spray tan booths, restock slippers and face shields regularly so each client gets uncontaminated, single-use gear. These steps aren’t just about cleanliness-they’re critical to tanning health and safety, protecting both your clients and your reputation.

Follow the Same Tanning Bed Cleaning Checklist Every Time

You’re guaranteeing top-tier sanitation every time when you stick to a standardized tanning bed cleaning checklist, and it starts with wiping down all high-touch surfaces using a hospital-grade disinfectant like Uva San-its proven formula, containing 0.025% Alkyl Dimethyl Ethylbenzyl Ammonium Chloride and 0.025% Benzalkonium Chloride, kills 95% of bacteria when applied correctly. You’ll also clean acrylic shields thoroughly, letting the solution dwell for several minutes to neutralize germs. Pre-treat heavily soiled spots with a concentrated mix before spraying sanitizing solution, and always use fresh cloths and sponges-never reuse them. At places like Zoom Tan, staff complete a full physical reset between guests, following a 50+ item Daily Cleaning & Store Preparation Task List. This consistency boosts customer satisfaction and guarantees every tanning experience feels safe, clean, and professional.

Show Clients Proof the Booth Is Ready

A clean tanning booth isn’t just about hygiene-it’s about trust, and at places like Zoom Tan, you’ll see that trust in action the moment you walk in. You’ll notice fresh towels and disposable Winks eyewear placed just for you, clear signs the booth’s been reset after the last guest. Every surface gets sprayed with hospital-grade Uva San Disinfectant-powered by Alkyl Dimethyl Ethylbenzyl Ammonium Chloride and Benzalkonium Chloride-killing 95% of bacteria with no rinse needed. There’s zero residue, so your skin contact stays safe and irritation-free. You’re not guessing whether it’s clean; you see it, smell it, experience it. A visible 50+ item Daily Cleaning & Store Preparation Task List is signed off and posted, confirming every touchpoint meets Fraser Health Authority standards. This transparency elevates your experience, making hygiene part of the comfort, not an afterthought.

Train Staff to Make Cleanliness Visible

Staff at Zoom Tan don’t just clean-they make cleanliness obvious, turning every wipe, spray, and restock into a visible signal of care. You’re trained to perform a full physical reset of each stand-up booth between guests, using color-coded cloths and hospital-grade Uva San Disinfectant with 0.025% Alkyl Dimethyl Ethylbenzyl Ammonium Chloride to prevent the spread of germs. This thorough training guarantees consistency across all 50+ locations. You visibly spray surfaces with sanitizing solution that inhibits 95% of bacterial growth, wiping down high-touch areas and restocking fresh towels where clients can see. You follow a 50+ item Daily Cleaning & Store Preparation Task List, from sanitizing counters to prepping beds. When asked, you confidently explain procedures, showing clients proof of sanitation. Your actions reflect strict adherence to Fraser Health Authority standards-helping maintain perfect inspection ratings and building trust through transparency.

On a final note

You keep clients safe by cleaning tanning beds after every use, using hospital-grade disinfectant with a 5-minute dwell time, and wiping all high-touch surfaces-face rest, handrails, bulbs. Replace linen, goggles, and earbud covers each time. Stick to a checklist, show sanitized booth tags, and train staff visibly. Cleanliness builds trust, prevents breakouts, and protects skin-just like daily SPF 30, gentle cleansers, and non-comedogenic lotions do.